LPC11E14FBD48/401,

The LPC11E14FBD48/401 is a 32-bit Microcontroller based on ARM Cortex-M0 core with RISC architecture operates at a maximum frequency of 50MHz. The device incorporates 32kB internal flash, 10kB internal RAM, 4kB EEPROM, four general-purpose counters/timers, 8-channel 10-bit A/D converter with sample rates of up to 400ksps and 40 general-purpose I/O pins. This device also features peripherals like one RS-485/EIA-485 USART with support for synchronous mode and smart card interface and one inter-integrated circuit (I2C).

• ARM Cortex-M0 built-in nested vectored interrupt controller (NVIC)
• Non-maskable interrupt (NMI) input selectable from several input sources
• System tick timer
• 16KB Boot ROM including 32-bit integer divide routines and power profiles
• In-system programming (ISP) and In-application programming (IAP)
• Standard JTAG test interface for BSDL
• Serial wire debug
• Up to 8 GPIO pins can be selected as edge and level sensitive interrupt sources
• Two GPIO grouped interrupt modules
• High-current source output driver (20mA) on one pin
• High-current sink driver (20mA) on true open-drain pins
• Programmable windowed watchdog timer (WWDT)
• 10-bit ADC with input multiplexing among eight pins
• Two SSP controllers with FIFO and multi-protocol capabilities
• Crystal oscillator with an operating range of 1MHz to 25MHz
• 12MHz High-frequency Internal RC oscillator (IRC)
• Internal low-power, low-frequency watchdog oscillator (WDO)
• PLL allows CPU operation up to the maximum CPU rate
• Clock output function with divider
• Integrated PMU (power management unit)
• Four reduced power modes - Sleep, deep-sleep, power-down and deep power-down
• Processor wake-up from deep-sleep and power-down modes
• Power-on reset (POR)
• Brownout detect with four separate thresholds
• Unique device serial number for identification

Applications

Consumer Electronics, Automation & Process Control, Medical, Industrial