EV6606-F-00A

EV6606-F-00A evaluation board is designed to demonstrate the capabilities of the MP6606, an 8-channel low-side (LS) driver with a serial interface. It integrates low-side MOSFETs (LS-FETs) and high-side (HS) clamp diodes to drive inductive loads. The MP6606 operates from a supply voltage up to 60V, and can deliver an output current (IOUT) up to 750mA. The MP6606 supports a 3.3V and 5V logic supply. Internal safety features include over-current protection (OCP), under-voltage lockout (UVLO), and over-temperature (OT) shutdown. The MP6606 has a LATCH pin. A rising edge on the LATCH pin latches the data from the temporary shift register into the output stage. LATCH provides the synchronizing signal in a multiple-device system. The MP6606 is typically used for unipolar stepper motors and solenoid drivers. The MP6606 is available in a thermally enhanced TSSOP-20EP package with an exposed thermal pad.

• 60V maximum winding clamp voltage
• 8 low-side MOSFETs (LS-FETs) and clamp diodes
• 700mohm MOSFET on resistance (RDS(ON))
• 750mA maximum output current when one LS-FET is on, or 500mA maximum IOUT when eight LS-FETs are on
• Fault indication output
• Control power supply not required
• Simple logic interface with Schmitt triggers

Notes

MPS part numbers ending in "-P" and "-Z" are the same parts. P & Z only indicates reel size.