EV33X03A

EV33X03A is an USB7252C 4-PORT TYPE-C GEN2 SMARTHUB EVB. The EVB-USB7252 is a demonstration and evaluation platform that provides the necessary requirements and interface options for evaluating the USB7252C, a 4-port SuperSpeed+ (SS+) USB SmartHub™ IC on a 4-layer PCB. This allows the user to gain an understanding of the product and accelerate the integration of the USB7252C into the user’s design. The EVB-USB7252 is compliant with the USB 2.0 High-Speed (HS), Full-Speed (FS), and Low-Speed (LS) USB signalling. The EVB-USB7252 is also compliant with USB 3.2 Gen2 on the upstream port and on 3 of the downstream ports including two USB Type-C™ interfaces. The fourth downstream port only supports USB2.0. The EVB-USB7252 platform also supports battery charging on all six downstream ports (maximum of 10A) at any one time. The EVB-USB7252 supports FlexConnect role reversal for any of the six downstream ports with the upstream port.

• USB 3.2-compliant (Gen2 operation), USB Gen2 Type-B upstream port
• 4 downstream USB ports: 3 Gen2 downstream ports, 2 USB Type-C, 1 USB 2.0-only downstream port
• All downstream ports support individual port power and overcurrent sense
• All downstream ports can be enabled for battery charging w/ battery charging select shunts J10, J14
• Onboard SPI Flash for external downloadable firmware
• Operates from a single-voltage (+12V, regulated) external power supply
• Onboard 25MHz crystal or oscillator input
• Single onboard +5.2V/15A. +3.3V/0.5A, +1.2V/2A regulators
• Port Power, SPI FLASH active, Reset and regulator output LED indicators
• Bridge peripheral functions: USB-to-UART (CDC), USB-to-I2S™ Audio Codec, USB-to-I2C
• On-board 25 MHz crystal or oscillator input
• Single on-board +5.2V/15A. +3.3V/0.5A, +1.2V/2A regulators
• Port Power, SPI FLASH active, Reset and regulator output LED indicators
• Bridge peripheral functions: USB-to-UART (CDC), USB-to-I2S™ Audio Codec, USB-to-I2C

Contents

EVB-USB7252 evaluation board, Type-A to Type-uB USB cable.