CTB0100/3

The CTB0100/3 is a three-pole interlocking screw-type PCB terminal block from the CamdenBoss CTB0100 series. It features a 5 mm pitch and is designed for through-hole PCB mounting using a rising-clamp mechanism for secure wire connection. The block is rated for 24 A at 250 V, with UL approval for 14 A at 300 V, and supports wire sizes from 0.2 mm² to 4.0 mm² for solid conductors and 0.2 mm² to 2.5 mm² for stranded conductors (approximately 30AWG - 12 AWG). Its housing is manufactured from UL94-V0 flame-retardant polyamide, typically supplied in green or grey. The contacts and clamps are made from tinned, nickel-plated brass, and the captive M3 steel screws are zinc-plated with a recommended torque of 0.5 Nm. The unit offers a dielectric strength of at least 2 kV and impulse withstand voltage of 4 kV, and operates reliably up to 110 °C. It includes a double interlocking feature for enhanced mechanical strength and guided-pin alignment for easy assembly. The CTB0100/3 is RoHS compliant and approved to UL and VDE standards.

• 3 Pole interlocking screw-type PCB terminal block (CamdenBoss CTB0100 series)
• 5 mm pitch, through-hole rising-clamp mounting
• Electrical Ratings: 24 A at 250 V; UL rating 14 A at 300 V
• Wire Size: 0.2mm - 4mm² (solid), 0.2mm² - 2.5 mm² (stranded) (30AWG - 12 AWG)
• Housing: Polyamide UL94-V0 flame-retardant (green or grey)
• Contacts & Clamps: Tinned, nickel-plated brass
• Screw: Captive M3 steel, zinc plated; torque 0.5 Nm
• Dielectric Strength: ≥ 2 kV; Impulse Withstand: 4 kV
• Operating Temperature: Up to 110 °C
• Features: Double interlocking mechanism; guided-pin alignment
• Compliance: UL and VDE approved; RoHS compliant