MAX335CWG+

The MAX335CWG+ is a 8-channel single-pole single-throw Serial Controlled Switch for serial data acquisition. All switches conduct equally in either direction and on-resistance (100W) is constant over the analogue signal range. These CMOS switches can operate continuously with power supplies ranging from ±4.5 to ±20V and handle rail-to-rail analogue signals. Upon power-up, all switches are off and the internal serial and parallel shift registers are reset to zero. The MAX335 is equivalent to two DG211 quad switches but controlled by a serial interface. The interface is compatible with the Motorola SPI interface standard. Functioning as a shift register, this serial interface allows data (at DIN) to be locked in synchronous with the rising edge of clock (SCLK). The shift register's output (DOUT) enables several MAX335s to be daisy chained.

• SPI-compatible serial interface
• Accepts ±15V analogue swings
• Multiple devices can be daisy chained

Applications

Test & Measurement, Automation & Process Control, Avionics, Communications & Networking

Warnings

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party