MAX13053ESA+

MAX13053ESA+ is a pin-for-pin compatible, industry-standard, high-speed, control area network (CAN) transceiver with extended ±80V fault protection. It is ideal for industrial network applications where overvoltage protection is required. This CAN transceiver provides a link between the CAN protocol controller and the physical wires of the bus lines in a CAN. This device can be used for DeviceNet® applications, requiring data rates up to 1Mbps. The CAN transceiver has an input common-mode range greater than ±12V, exceeding the ISO11898 specification of -2V to +7V, and features ±8kV ESD protection, making this device ideal for harsh industrial environments. The CAN transceiver provides a dominant timeout function that prevents erroneous CAN controllers from clamping the bus to a dominant level if the TXD input is held low for greater than 1ms. Applications include DeviceNet nodes, medium- and heavy-duty truck systems, and industrial.

• Fully compatible with the ISO11898 standard
• ±8kV ESD IEC 61000-4-2 contact discharge per IBEE test facility
• Low-current standby mode, thermal shutdown, short-circuit protection
• Transmit (TXD) data dominant timeout, current limiting
• VCC supply current is 12.5mA max at recessive, VCC=+5V ±5%, VCC2=+3V to +3.6V, TA=TMIN to TMAX
• Standby current is 12.5mA max at VCC=+5V ±5%, VCC2=+3V to +3.6V, TA=TMIN to TMAX
• Common-mode input resistance is 35kohm max at normal or standby mode, VCANH=VCANL=±12V
• Input leakage current is +5µA max at VCC=0, VCANH=VCANL=5V
• 8 SO package
• Temperature range from -40°C to +85°C

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party