You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.

Product may not be an exact match for your search

You previously purchased this product. View in Order History



iButton Memory, Add Only, 1Kbit, EPROM


Image is for illustrative purposes only. Please refer to product description.

Manufacturer Part No:
Order Code:
Technical Datasheet:
DS1982-F3+   Datasheet
See all Technical Docs

Product Overview

The DS1982-F3+ is a 1Kb add only iButton in F3 MicroCan package. It is a rugged read/write data carrier that identifies and stores relevant information about product or person to which it is attached. This information can be accessed with minimal hardware such as single port pin of a microcontroller. The DS1982 consists of a factory lasered 64bit registration number that includes an unique 48bit serial number, an 8bit CRC and an 8bit family code (09h) plus 1Kb user programmable EPROM. The power to program and read DS1982 is derived entirely from 1-wire communication line. Data is transferred serially via 1-wire protocol which requires only single data lead and ground return. Alternatively, the part may be programmed multiple times with new data being appended but not overwriting existing data with each subsequent programming of device. A provision is also included for indicating that certain page or pages of data are no longer valid and have been replaced with new or updated data.
  • 1024bit EPROM communicates with economy of one signal plus ground
  • EPROM partitioned into four 256bit pages for randomly accessing packetized data
  • Each memory page can be permanently write protected to prevent tampering
  • Additional data can be programmed into EPROM without disturbing existing data
  • Reduces control, address, data, power and programming signals to a single data pin
  • 8bit family code specifies DS1982 communications requirements to reader
  • Reads over wide voltage range of 2.8V to 6V (-40 to 85°C), programs at 11.5V to 12V (-40°C to 50°C)
  • Multidrop controller for MicroLAN, digital identification and information by momentary contact
  • Durable stainless steel case engraved with registration number withstands harsh environments
  • Easily affixed with self stick adhesive backing, latched by its flange or locked with ring


Embedded Design & Development


Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.

Product Information

Want to see similar products? Simply select your required attributes below and hit the button ×




MSL 1 - Unlimited

Find similar products Choose and modify the attributes above to find similar products.

Technical Documents (2)

Available for back order

Deliveries start from 17/07/23

Due to market conditions delivery times are for general guidance only and may be subject to change at short notice

Notify me when back in stock

$6.45 ( $7.10  Inc. GST)

Pricing is unavailable. Please contact customer services.

Price for:
Multiple: 1 Minimum: 1
  • 1+
  • 5+
Quantity Price (Incl GST) Your Price
1+ $6.45 ($7.10)
Promotional price
Contract Price
Web only price
Web only contract price
  ( )
5+ $6.33 ($6.96)
Promotional price
Contract Price
Web only price
Web only contract price
  ( )
Quantity Price (Incl GST) Your Price

Pricing is unavailable. Please contact customer services.

No longer stocked:: No Longer Manufactured::
Add to Basket Add to Basket Pre-Order
Restricted Item
Enter Your Part No/Line Note
Total Price:
Total Price: ( )
Total Price: --