ADA4622-2ACPZ-R7

ADA4622-2 is a single-supply, rail-to-rail output (RRO), precision junction field effect transistors (JFET) input op-amp. It includes many improvements that make the desirable as upgrades without compromising the flexibility and ease of use that makes the device useful for a wide variety of applications. The input voltage range includes the negative supply and the output swings rail-to-rail. Input EMI filters increase the signal robustness in the face of closely located switching noise sources. The speed, in terms of bandwidth and slew rate, increases along with a strong output drive to improve settling time performance and enables the devices to drive the inputs of modern single-ended, successive approximation register (SAR) analogue-to-digital converters (ADCs). It is used in applications such as high output impedance sensor interfaces, photodiode sensor interfaces, transimpedance amplifiers, ADC drivers, precision filters and signal conditioning.

• Wide gain bandwidth product is 8MHz typical
• High slew rate is 23V/µs typical at (low to high transition, TA = 25°C)
• Input bias current is +2pA typical at (TA = 25°C)
• Offset voltage is ±0.8mV maximum at (TA = 25°C)
• Rail-to-rail output, input voltage range includes pin V-
• Electromagnetic interference rejection ratio is 90dB typ at (f = 1000MHz and f = 2400MHz)
• Low offset voltage drift is ±4µV/°C maximum at (TA = 25°C)
• Supply current per amplifier is 665µA typical at (TA = 25°C)
• 15.5MHz typical -3dB bandwidth at (TA = 25°C)
• Operating temperature is -40°C to +125°C, package style is 8-lead LFCSP

Notes

ADI products are only authorized (and sold) for use by the customer and are not to be resold or otherwise passed on to any third party