NXP IOTZTB-DK006 Zigbee and BLE IoT Development Kit

Accelerate IoT innovation with NXP IOTZTB-DK006, supporting BLE, Zigbee 3.0, Thread, Matter, NFC, and scalable mesh networking for smart building and industrial applications.

The NXP IOTZTB-DK006 is a versatile development kit built for K32W061/41 and JN518x wireless microcontrollers, designed to accelerate IoT application development. Supporting multiple wireless protocols, including Thread, Zigbee 3.0, Bluetooth Low Energy (BLE), NFC, and Matter, this kit is ideal for smart home, industrial IoT, building automation, and connected lighting solutions.

Engineers benefit from the kit’s onboard debugger/programmer, extensive hardware interfaces, and sensor connectivity options. It also includes sample code, software tools, and detailed documentation to streamline prototyping and shorten development cycles.

Key advantages of the IOTZTB-DK006 include ultra-low power operation, secure wireless communication, and scalable mesh networking capabilities for robust, interoperable IoT deployments. Whether you are designing next-generation smart building devices or testing connected sensor networks, this evaluation platform provides all the hardware and software support needed for rapid development and reliable, future-ready IoT solutions.

Buy Now ►

User Guide► About NXP ►

Kit Contents

Carrier main Board
Generic Router with NFC Reader
Generic Switch Node
Light/Sensor node
K32W061 USB dongle
3 x JN5189 Upgrade boards
3 x K32W Upgrade boards

Features and Benefits

The carrier main board includes the following features:

K32W061/041 upgrade module site
NFC Tag with printed antenna
On-board, high-speed USB based, Link2 debug probe with ARM’s CMSIS-DAP and SEGGER J-Link protocol options.
Link2 probe can be used with on-board K32W061/041 or external target.
Support for external debug probes.
Power, Reset, ISP and UART Tx/Rx LEDs.
Target Reset, and User buttons.
Expansion options based on Arduino R3, plus additional expansion port pins.
On-board 3.3V from USB port, 4xAAA batteries,2xAAA batteries (low-power mode) or external power supply options.
Built-in power consumption measurement.
UART, I2C and SPI port bridging from LPC4233 target to USB via the on-board debug probe.
8MB Macronix MX25R QSPI flash.
FTDI USB connector.