You have entered a value in the highlighted fields below that contain invalid characters. Please revise your selection using valid characters only.
Product may not be an exact match for your search
You previously purchased this product.
View in Order History
FTDI FT4232HQ-REEL
Interface Bridges, USB to UART, MPSSE, 1.62 V, 1.98 V, QFN, 64 Pins, -40 °C
- Manufacturer:
- FTDI FTDI
- Manufacturer Part No:
- FT4232HQ-REEL
- Order Code:
- 1697464
-
- Technical Datasheet:
- FT4232HQ-REEL Datasheet
- ECAD / MCAD
-
Product Overview
The FT4232HQ-R is a 5th generation USB 2.0 High-speed (480Mbps) to UART IC. It has the capability of being configured in a variety of industry standard serial or parallel interfaces. The IC features 4 UARTs. Two of these have an option to independently configure an MPSSE engine, this allows the IC to operate as two UART/bit-bang ports plus two MPSSE engines used to emulate JTAG, SPI, I²C, bit-bang or other synchronous serial modes.
- Single chip USB to quad serial ports with a variety of configurations
- Entire USB protocol handled on chip, no USB specific firmware programming required
- USB 2.0 high-speed (480Mbps) and full-speed (12Mbps) compatible
- Two multi-protocol synchronous serial engine (MPSSE) on channel A and channel B
- Independent baud rate generators
- RS232/RS422/RS485 UART transfer data rate up to 12Mbaud (RS232 Data Rate Limited)
- FTDI's royalty-free virtual com port (VCP) and direct (D2XX) drivers
- Optional traffic TX/RX indicators can be added with LEDs and an external 74HC595 shift register
- Adjustable receive buffer timeout
- Support for USB suspend and resume conditions via PWREN#, SUSPEND# and RI# pins
- Highly integrated design
- FTDI FT232B style, asynchronous serial UART interface option
- Fully assisted hardware or X-On/X-Off software handshaking
- UART interface supports 7/8-bit data, 1/2 stop bits and odd/even/mark/space/no parity
- Auto-transmit enable control for RS485 serial applications using TXDEN pin
- Operational configuration mode and USB description strings configurable in external EEPROM over USB
- Low operating and USB suspend current
- Configurable I/O drive strength (4, 8, 12 or 16mA) and slew rate
- Supports bus powered, self powered and high-power bus powered USB configurations
- UHCI/OHCI/EHCI host controller compatible
Applications
Computers & Computer Peripherals, Audio, Sensing & Instrumentation, Industrial, Automation & Process Control
Footnotes
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
Warnings
ESD sensitive device, take proper precaution while handling the device.
Product Information
Want to see similar products? Simply select your required attributes below and hit the button ×
- :
- USB to UART, MPSSE
- :
- 1.62V
- :
- 1.98V
- :
- QFN
- :
- 64Pins
- :
- -40°C
- :
- 85°C
- :
- -
- :
- -
- :
- MSL 3 - 168 hours
Technical Documents (1)
30,413 total stock globally Need more?
×
You can reserve stock now just order your desired quantity and checkout as normal. The quantity that cant be dispatched now will be placed on back order and sent as soon as we get a delivery from our supplier. You only get charged when the products are dispatched to you.
Extra stock is available upon order to the Supplier Lead Time which is approximately 18/03/24
30,413 UK stock available for 5-8 business days delivery
Due to market conditions delivery times are for general guidance only and may be subject to change at short notice
$10.65
(
$11.72
Inc. GST)
Pricing is unavailable. Please contact customer services.
- Price for:
- Each
Multiple: 1 Minimum: 1
- 1+
| Quantity | Price (Incl GST) | Your Price |
|---|---|---|
| 1+ | $10.65 ($11.72) | ( ) |
| Quantity | Price (Incl GST) | Your Price |
|---|
Pricing is unavailable. Please contact customer services.
Total Price:
Total Price: ( )
Total Price: --
Filter Tool