Low
DS90LV804TSQ/NOPB -
LVDS Driver, 4-Channel, Differential Buffer / Repeater, 35 ps, 140 mA, -40 °C, 85 °C, 3.15 V
- Manufacturer:
- TEXAS INSTRUMENTS TEXAS INSTRUMENTS
- Manufacturer Part No:
- DS90LV804TSQ/NOPB
- Order Code:
- 2101239RL
- Technical Datasheet:
- (EN)
Product Information
Product Overview
The DS90LV804TSQ/NOPB is a 4-channel 800Mbps LVDS Buffer/Repeater features both an internal input and output (source) termination to eliminate these extra components from the board and to also place the terminations as close as possible to receiver inputs and driver output. This is especially significant when driving longer cables. An output enable pin is provided, which allows the user to place the LVDS outputs and internal biasing generators in a TRI-STATE, low power mode. The differential inputs interface to LVD and Bus LVDS signals such as those on TI's 10, 16 and 18-bit Bus LVDS SerDes, as well as CML and LVPECL. The differential inputs are internally terminated with a 100R resistor to improve performance and minimize board space. This function is especially useful for boosting signals over lossy cables or point-to-point backplane configurations.
- Low output skew and jitter
- LVDS/CML/LVPECL compatible input, LVDS output
- On-chip 100R input and output termination
- 12kV ESD protection on LVDS outputs
- Very low power consumption
- Green product and no Sb/Br
Applications
Industrial
Warnings
This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.
