Low

PHOENIX CONTACT  SACC-E-M12MS-5CON-PG9/0,5  Sensor Connector, Sensors and Actuators

PHOENIX CONTACT SACC-E-M12MS-5CON-PG9/0,5
Technical Data Sheet (85.19KB) EN See all Technical Docs

Image is for illustrative purposes only. Please refer to product description.

Product Overview

The SACC-E-M12MS-5CON-PG9/0,5 is a 5-position A-coded M12 sensor/actuator Flush-type Plug with individual wires connection. It has CuZn contacts and PA 66 (polyamide 66) contact carrier. Standard pin assignments and coding for signal, data and power transmission with uniform design-in design.
  • Front/screw mounting with PG9 thread
  • Nickel-plated brass knurls
  • Pre-assembled with TPE litz wires for immediate use
  • Sealed on the litz wire side for optimum leak-tightness
  • For high transmission safety - Shield connection to the housing with optional EMC nut
  • 4A Rated current at 40°C
  • 60V Rated voltage
  • 1.5kV Rated surge voltage
  • >100MR Insulation resistance
  • 0.34mm² Conductor cross section
  • IP67 Protection

 

Product Information

For Use With:
Sensors and Actuators
Product Range:
-
Gender:
Plug
Termination Type:
Wire Leaded
No. of Contacts:
5 Contacts
SVHC:
To Be Advised

Find similar products  grouped by common attribute

Applications

  • Sensing & Instrumentation

Legislation and Environmental

Country of Origin:
Germany

Country in which last significant manufacturing process was carried out

RoHS Compliant:
Yes
Tariff No:
85444290
Weight (kg):
.0208

Associated Products

Similar Products

Find products functionally similar to this one. Select one of the following links, and you will be taken to a product group page that presents all products in this category that share the given attribute.